BlueIce Smart KI
The BlueIce is ISO 13485 + EU MDR CE, “Made in Germany”.
Artificial intelligence. Precision. Cooling. Performance.
- 755 nm
- 808 nm
- 940 nm
- 1064 nm
- KI Smart Scanner 2.0
- Freezing down to −36 °C
One technology. Five colourways.
The BlueIce Smart KI comes in five housing variants – identical technology, matched to your studio interior. Select a colour and view the device.
Custom colours on request · lead time depends on the configuration
Intelligence meets energy.
The BlueIce Smart KI does not run on rigid programmes. Scanner, control and cooling work together – the operator stays in control while the system keeps the parameters stable.
- 01
Skin Analysis
Skin and hair type are captured before the treatment.
- 02
Parameter Calculation
Energy, pulse and frequency are suggested.
- 03
Energy Control
Energy output is held stable across the pulse.
- 04
Cooling Control
Contact cooling follows the energy density.
- 05
Treatment Assistance
The panel guides you through zones and passes.
- 06
Live Optimization
Values are readjusted as the treatment progresses.
Parameters that think along.
The KI Smart Scanner 2.0 reads skin and hair type and readjusts energy, pulse duration, frequency, wavelength and cooling during the treatment. The values below show the setting ranges of the control panel.
| Energy | 12 – 22 J/cm² |
|---|---|
| Pulse | 10 – 60 ms |
| Frequency | 5 – 10 Hz |
| Wavelength | 755 – 1064 nm |
| Cooling | −5 – −15 °C |
| Skin Type | I – VI |
| AI Mode | ASSIST – EXPERT |
Four wavelengths. One depth per task.
Fine and light hair
Universal basis
Strong structures
Darker skin types
The working range for permanent hair removal across all skin and hair types I–VI.
Schematic illustration
Cold is control.
- +20°
- +10°
- 0°
- −5°
- −10°
- −15°
- −26°
- −36°
The Alix Freezing cooling system of the BlueIce Smart KI cools the contact surface down to −36 °C. Cooling is not a comfort extra here: it keeps the epidermis protected while the energy reaches the target structure.
Power Bar · 4 attachments
Precision without compromise.
LED Laser Power Bar
Four attachments for different zones and spot sizes – changed without tools.
KI Smart Scanner 2.0
Captures skin and hair type as the basis for the parameter suggestion.
Alix Freezing System
Contact cooling down to −36 °C, regulated to the delivered energy density.
Smart Display
Treatment guidance with zones, passes and real-time parameters.
Boost mode
Additional power reserve for strong structures, released in stages.
Service connection
Remote maintenance through the German service centre, replacement unit within the warranty period.
Five points that make the difference.
- 01
Smart Display
Treatment guidance with zones, passes and real-time parameters.
- 02
KI Smart Scanner 2.0
Skin and hair type captured directly on the device.
- 03
Prime Cooling
Alix Freezing cooling system, regulated down to −36 °C at the contact surface.
- 04
LED Laser Power Bar
Handpiece with four interchangeable attachments.
- 05
Power System
Power electronics with boost reserve and temperature monitoring.
Schematic illustration — binding values in the technical data sheet
System start-up as on the real device
Demonstrative illustration of the start-up sequence – this is how the BlueIce display reports in before a treatment.
- BOOTALIX BLUEICE · SMART KI
- SYSTEM READYSelf-test completed · interlock verified
- AI ACTIVESkin type and hair structure analysis active
- WAVELENGTH755 · 808 · 940 · 1064 nm modules synchronised
- COOLINGContact cooling at target temperature
- ENERGYFluence and pulse width calibrated
- STARTSystem ready for treatment
What the start-up sequence shows
Each step corresponds to a functional group of the system: safety check, AI analysis, wavelength selection, cooling and energy parameters. Only once every group is ready does the device release the treatment.
- · Safety and interlock check before every session
- · AI suggestion as a starting point, adjustable manually at any time
- · Cooling reaches the target temperature before the first pulse
Demonstrative illustration · no live connection to the device
The system from the inside
Select an assembly – handpiece, cooling, laser module, display or software – and see which function it performs within the system.
Handpiece
Ergonomic handpiece with a cooled sapphire window and a large spot area for fast treatment of large zones.
- · Cooled sapphire window
- · Large treatment spot
- · Easy cable management
Schematic illustration · technical details on request
Technical data, in motion.
755 + 808 + 940 + 1064 nm incl. boost
KI Smart Scanner 2.0 with parameter suggestion
Power reserve via boost mode
Alix Freezing cooling system down to −36 °C
LED Laser Power Bar with 4 attachments
Parameter guidance directly on the Smart Display
| Model | Alix BlueIce Smart KI |
|---|---|
| Wavelengths | 755 / 808 / 940 / 1064 nm |
| Power | 3000 W |
| Frequency | 20 Hz |
| Fluence | 129 J/cm² |
| Pulse duration | 50 ms |
| Spot sizes | 4 Tips |
| Cooling | -34 °C |
| Laser class | Class 4 |
| Intended use | Medizinisches Diodenlaser-System zur dauerhaften Haarentfernung bzw. Haarreduktion an menschlicher Haut; Anwendung ausschliesslich durch geschultes Fachpersonal. |
| Pulse power | 3000W |
| Category | Diodenlaser |
| Warranty | 10 years |
Technology is half of it. Support is the other half.
Service centre Germany
Technical support, remote maintenance and a replacement unit within the warranty period.
View serviceAlix Academy
Training and certification for operators – including the German NiSV topics.
View academyConsultation & demonstration
Personal consultation, demonstration and financing through our team.
Request an appointmentExperience the four wavelengths, the KI Smart Scanner and cooling down to −36 °C in your own studio.